Friday, February 3, 2023
    HomeReassure your End-users on their Electric-powered Heavy Equipment Investment Thanks to Simulation...

    Reassure your End-users on their Electric-powered Heavy Equipment Investment Thanks to Simulation and Testing

    Guest post by Adolique,  Siemens Digital Industries Software 

    Before a buyer invests in electric-powered heavy equipment, it’s critical the makers prove the efficiency of their machines. One option for OEMs is to use a smart combination of simulation and testing, such as Simcenter. This allows anticipating this efficiency in cost, time, and quality.

    Investing with certainty

    Some industrial purchases are a high and considerable investment. As mentioned in Durability is a top priority for heavy machine makers, an excavator costs as much as a family home and even a small backhoe matches the cost of a luxury car. Who would buy a product entailing new technologies without being certain of its full efficiency and productivity? Answer: no one.

    Any individual consumer and industry end user’s specifically identified concerns they want to address before any purchase.

    New technologies to power small heavy equipment machines

    Driven by environmental and efficiency concerns, the OEMs of the heavy equipment sector are rethinking the way to power their machines. Consequently, the offer for electric heavy equipment increases. Indeed, electrified construction machines – and mainly compact equipment – are often ideal in heavily populated urban environments, made of low emission zones. This trend towards electric-powered machine is also due to the technologies becoming more mature and affordable. Of course, this has been aided by their development and use in the on-road segment. Beyond emissions regulations, noise reduction is a factor thanks to electric-powered heavy equipment. Reduced noise is another considerable benefit for operators and for others’ comfort and safety on the job site.

    There is an initial focus on smaller equipment because conventional power-engine remains the most appropriate power source for larger equipment.

    Whatever the alternatives to fuel are, the new machines must allow operators to keep working in the same, if not better, conditions. As well, operators aim at reaching the same operability and productivity than when using conventional/diesel-engine machine regardless of the technology. Those alternatives vary from full-electric with battery-powered, fuel-cell or still hybrid machine.

    Mecalac – French OEM offer the market with a full electric wheeled excavator
    Mecalac – French OEM offer the market with a full electric wheeled excavator

    Legitimate concerns when it comes to heavy equipment electric power sources as fuel alternatives

    Regardless of the efforts by the OEMs to bring cleaner and quieter machines to the market, the end-user concerns remain present. They can wonder: will my TCO remain stable? If I opt for a battery, what will be the charging times? Will this technology shorten my operation capacities and, if so, make me less productive?

    All are very legitimate questions that OEMS must answer with concrete fact and figures. And that is where the use of a smart combination of simulation and testing is a key ally to leading the innovation race towards electrification.

    Answering technical issues caused by an electric-powered machine thanks for simulation and testing

    Simulation is the only option to design and analyze new machine architecture efficiency, way before the machine will physically dig, lift or carry. Simulation provides conclusive answers to possible technical concerns issues. While testing enables a machine in operation to capture data and feed the data back to existing models to improve the next machine generation. Getting access to a complete portfolio such as Simcenter is key to move on the following product development steps:

    Comparing various architectures and the finding the best electric power source technology

    As a first step, simulation enables to compare various architectures based on newly defined technology. It helps to determine if a full electric or a hybrid version meets the flexibility needs of the customer.

    Once a common direction is defined for the architecture, system simulation can be used to perform component sizing and cascade down requirements for each component. This eases the collaboration with suppliers.

    System simulation analysis is a first step in the product development cycle to have a raw view of what should be the global machine architecture. All of it without compromising various attributes performances, and identify what should be the correct technology to invest in.

    Hyster Yale electrified lifter architecture comparison worklift
    Hyster Yale electrified lifter architecture comparison worklift

    Finetuning the power source and electric actuators design using simulation

    Once the architecture is defined and main components are sized at machine level, the next step is to fine tune the power source and electric actuators design. This covers battery, fuel cell stack, electric machines, electrical and electronics design. Therefore, it is mandatory for an engineering group to have access to a portfolio of simulation tools that covers in details multi-physics domains and the entire so-called V-cycle.

    Additionally, engineering departments are progressively acquiring knowledge on new electric technologies. Therefore, a correct simulation solution should not only rely on domain simulation solutions (like CFD, FEA, 3D or yet 1D) but also on component-oriented solutions: battery, fuel cell, electric motors, and electronics dedicated simulation and testing capabilities. This eases and accelerates engineering group expertise.

    Key electrified components design
    Key electrified components design

    Verifying and validating electric component control logic

    In parallel with the model development, engineers should verify and validate electric components control. Indeed electrification also implies an increase in software complexity, especially with hybrids. How do you manage the split between internal combustion engine and electric motor? How to you ensure battery safe operation?

    A model-based approach can accelerate and improve the development of advanced control strategies. It supports the set-up of X-in-the-loop virtual or physical benches bringing an accurate representation of the hardware as a support of the control development.

    Control logic verification and validation
    Control logic verification and validation

    Optimizing and balancing performance attributes at virtual integration stage of your electric-powered heavy equipment

    Last but not least: integration. Once you have validated every component and control design, it is time to integrate them within the machine assembly. This is when a model-based approach would bring back the system simulation in the loop of the development. Details analysis results and outcomes are imported within a system level view via different solutions, from simple data import to weak or strong coupling simulation capabilities.

    Reach the best component integration into the machine assembly
    Reach the best component integration into the machine assembly

    The final objective of this virtual integration is to optimize performance attributes. It allows to find the correct balance between operability, thermal management, acoustics, NVH or even durability before building the first prototype.

    Our key takeaways about using simulation and testing for heavy equipment:

    • Boost engineering process from the early stages by making the correct decisions on electrified architecture from the start.
    • Acquire expertise and deepen the electrified components analysis with integrated ‘métier’ capabilities.
    • Deploy a model-based approach to support advanced controls development and validation.
    • Optimize performance attributes and find the best comprise to fit both regulations and market requirements.


    Thank you Adolique,  Siemens Digital Industries Software for the guest post. 




    Sachin R Nalawade
    Sachin R Nalawade
    Founder and Editor DailyCADCAM. A highly-driven astute professional and avid marketer; equipped with a solid foundation in Academia; Manufacturing, CAD, CAM, CAE industry and Implementing Marketing Initiatives for Global Brands (All Design Software and Hardware Vendors).

    ZWCAD 2022 Trial Download

    - Advertisment -

    Join Siemens AM Network now

    - Advertisment -

    Most Popular