LUCERNE, Switzerland, Feb 5, 2021 – BETA CAE Systems announces the v20.1.5 release for ANSA/EPILYSIS/ META and KOMVOS, hosting numerous fixes in recently detected issues.
Follows a selection of the most important items:
Known issues resolved in ANSA
CAD Import/Export
Several cases, related to reading CAD formats, have been successfully combatted, as follows:
- Upon reading Neutral files using CoreTechnologie libraries, PID from Layers would not be correctly generated.
- Referencing CATIA Translators, 3D Point entities would be erroneously disregarded, when “Read features” mode was activated.
- When using ANSA Translator, the import of STEP files was susceptible to missing unit changes, encountered in assemblies designed in mixed units.
Compare
Time required for the creation of the Compare Report and the size of the generated METADBs are now significantly reduced.
Indicatively, in small models of ∼40 parts, the execution time has been reduced from ∼12min to ∼3min and the generated METADBs size from ∼400MB to ∼9MB. In large models of ∼400 parts, the reduction is even more impressive in the generated METADBs size, from an excess of 15GB to less than 100MB, executed in ∼47min in total.
FE Representations
The realization of SPIDER2 Representation could fail in case of nearby attached solids, whereas the treatment of non-circular BOLT holes would not be successfully applied.
Volume Mesh
Unexpected termination could occur when the function Structured Mesh > Extrude [Revolute] produced more than one volumes, according to connectivity, PID, or part of the source area.
Checking Mesh [Void Areas], areas at locations of hanging edge between a warped quad shell/facet and the two corresponding tria shells/facets are not identified as Void Areas anymore.
Deck Tools
Unexpected termination could occur upon Units Conversion in a database containing 3D Points.
Safety
Differences between CNCAP and KNCAP with EuroNCAP are now taken into account for Car Marking in the Pedestrian tool.
Morph
The robustness of Direct Morphing DFM functionality has been fortified, in cases of geometry with poor underlying surface quality.
For more details about the new software features, enhancements and corrections please, refer to the Release Notes document.
Known issues resolved in EPILYSIS
General
Unexpected termination could occur when GPSTRESS was requested on fluid elements upon Output, and when a DRESP2 would reference a DRESP2 with higher ID in SOL200.
For more details about the new software features, enhancements and corrections please, refer to the Release Notes document.
Known issues resolved in META
Decks – Fluent
Reading times of Fluent .dat result files have been significantly improved and META can now read multiple states of .h5 format for transient analysis. Furthermore, META is no longer terminating while reading “Volume Fraction” scalar results of Fluent .cdat files.
Decks – TAITherm
META would unexpectedly terminate, upon auto-detection of TAITherm files.
NVH Calculators – FRF Assembly
In certain cases where Linear Combination nodes were used as responses, calculations could be incorrect since v20.1.0, depending on the included loadcases.
Project Files & METADB
After loading a Project File, META displayed the list of all available results, besides the ones saved. In addition, Set IDs were not successfully saved in Project Files.
File Export
Unexpected termination could occur when exporting in 3DXML format.
User Toolbars
In the Crash & Safety domain, Occupant Injury Criteria Toolbar now efficiently offers C-NCAP 2021 Rating, whereas Haigh Diagram was not successfully created for user created states, under the respective Haigh Diagram Toolbar.
For more details about the new software features, enhancements and corrections please, refer to the Release Notes document.
Known issues resolved in KOMVOS
Input Model Definition
Input Model Definition would not work for CATProduct files, ProE files or JT format trees.
For more details about the new software features, enhancements and corrections please, refer to the Release Notes document.
Compatibility and Supported Platforms
ANSA files saved by all the first and second point releases of a major version are compatible to each other. New major versions can read files saved by previous ones but not vice versa.
META Project files saved from version 20.1.5 are compatible and can be opened by META version 16.0.0 or later. To be readable by META versions earlier than v16.0.0, they have to be saved selecting the option “Version 16.0.0” or “Version <16.0.0”.
- *Support for Mac OS has been discontinued.
- *Support for 32-bit platform has been discontinued for all operating systems.
Download
Where to download from
Customers who are served directly by BETA CAE Systems, or its subsidiaries, may download the new software, examples and documentation from their account on our server. They can access their account through the “sign in” link at our web site.
Contact us if you miss your account details. The Downloads menu items give you access to the public downloads.
Customers who are served by a local business agent should contact the local support channel for software distribution details.
What to download
All files required for the installation of this version reside in the folders named “BETA_CAE_Systems_v20.1.5” and are dated as of February 2, 2021. These files should replace any pre-releases or other files downloaded prior to that date.
The distribution of this version of our pre- and post-processing suite is packaged in one, single, unified installation file, that invokes the respective installer and guides the procedure for the installation of the required components.
For the installation of the software on each platform type, download from the respective folders, the .sh file for Linux or the .msi file for Windows.
In addition to the above, optionally, the META Viewer is available to be downloaded for each supported platform.
The tutorials and the example files reside in the folder named “TUTORIALS”. This folder includes the complete package of the tutorials and example files, and a package with only the updated ones.
The Abaqus libraries required for the post-processing of Abaqus .odb files are included in the installation package and can be optionally unpacked.
Earlier software releases are also available in the sub-directory called “Previous_Versions” or in a folder named after the product and version number.
About BETA CAE Systems
BETA CAE Systems is a private engineering software company committed to the development of state of the art CAE software systems that meet the requirements of all simulation disciplines. The company’s products, the ANSA pre-processor/ EPILYSIS solver and META post-processor suite, and SPDRM, the simulation-process-data-and-resources manager, hold a worldwide leading position across a range of industries, including the automotive, railway vehicles, aerospace, motorsports, chemical processes engineering, energy, electronics, heavy machinery, power tools, and biomechanics.
Committed to its mission to produce best-in-class CAE software systems, BETA CAE Systems offers products that consistently exceed expectations and provides exemplary technical support to its customers. The company’s continuously growth attest to the high level of customer satisfaction and user confidence. For more information, visit http://www.beta-cae.com.
