Home Blog Page 706

Ansys Announces Winners of 2020 Art of Simulation Competition

By
Sachin R Nalawade
-
0

PITTSBURGH, PA, USA, Jan 5, 2021 – The six winning entries of the first annual Ansys (NASDAQ: ANSS) Art of Simulation competition showcase how engineers are using Ansys’ cutting-edge simulation solutions to solve critical engineering challenges. The competition, which was launched to commemorate the company’s 50th anniversary, asked Ansys software users to share their most aesthetically pleasing simulation images to demonstrate the art that emerges from science.

 

winners

 

The winning images range from the radiation patterns of the most complex fighter aircraft radar system to an analytical approach to improving kidney dialysis.

Internal judges narrowed down more than 200 submissions to select finalists across six categories for public voting. More than 3,600 votes were cast across the categories of 3D design, electromagnetics, structures, fluids, healthcare and multiphysics.

Art of Simulation Winners:

Healthcare:

  1. Tamás Büki, CTO at YourAnastomosis, simulated the changes occurring in the walls of an artery used for kidney dialysis to better understand the changes seen during microscopic analysis of the artery tissue.

Structures:

  1. Boukhssas Salim, a mechanical engineering student at the Mohammadia School of Engineers in Morocco, studied the structural deformation of a train disc brake to minimize brake distortion during operation and improve safety.

Fluids:

  1. Rituja Kulkarni, CFD research assistant at the University of Cincinnati, analyzed the airflow in her apartment by simulating the wind entering through a window and balcony door, along with the effect of a rotating ceiling fan.

3D Design:

  1. Rodrygo Karassawa Zanoni, senior specialist engineer with FEM3D, analyzed the structural stress and deformation of a jacket seafastening.

Electromagnetics:

  1. Alexander Shalaby, a microwave design specialist at Meggitt Airframe Systems, simulated the radiation pattern of an active electronically scanned array radar with more than one thousand elements behind the nose cone of a fifth-generation fighter aircraft.

Multiphysics:

  1. Rahul Singh, an engineer with BRP, used multiphysics simulations to account for heating, cooling, pressure and fatigue in the development of a 300 horsepower, two-stroke outboard marine engine.

“We were overwhelmed by the artistic expression of the images that emerged when engineers used simulation to solve their toughest challenges,” said Lynn Ledwith, vice president and chief marketing officer at Ansys. “This first year of the Art of Simulation competition was a tremendous success in terms of the number of high-quality submissions we received worldwide. The images showcased not only the winners’ technical achievements, but also captured the beauty, art and imagination of their work.”

View the Ansys Art of Simulation web page to see the winning images and learn more about the competition.

About Ansys

If you’ve ever seen a rocket launch, flown on an airplane, driven a car, used a computer, touched a mobile device, crossed a bridge or put on wearable technology, chances are you’ve used a product where Ansys software played a critical role in its creation. Ansys is the global leader in engineering simulation. Through our strategy of Pervasive Engineering Simulation, we help the world’s most innovative companies deliver radically better products to their customers. By offering the best and broadest portfolio of engineering simulation software, we help them solve the most complex design challenges and create products limited only by imagination. Founded in 1970, Ansys is headquartered south of Pittsburgh, Pennsylvania, U.S.A. For more information, visit www.ansys.com.

Invitation
Siemens sd17

EON Reality Announces Academic XR Partnership with Maharaja Institute of Technology Thandavapura in Karnataka

By
Sachin R Nalawade
-
0

IRVINE, CA, USA, Jan 5, 2021 – EON Reality, the global leader in Augmented and Virtual Reality-based knowledge and skills transfer for industry and education, announces a new partnership with Maharaja Institute of Technology Thandavapura (MITT) in Karnataka, India.

 

1396
Maharaja Institute of Technology Thandavapura (MITT), Karnataka, India.

 

As EON Reality’s latest academic partner for XR solutions, MITT will receive a rollout of EON-XR for 100 selected users — with a particular emphasis on engineering students. As a career-focused college that utilizes groundbreaking technology to teach effective courses, MITT is a perfect representation of how even a small-scale rollout of EON-XR can help to improve the academic efficiency of hands-on learning.

“Bringing EON-XR to some of the top engineering students in India is massively rewarding for us, as we know that not only are we helping MITT and the surrounding community, but also the future of the global workforce. By training these students in XR as a part of their academic career, EON Reality is helping to guarantee that the next generation of engineers knows how to work, instruct, and create in the latest and greatest immersive technology. We are thrilled to see this partnership working so well.”, Dan Lejerskar, Founder of EON Reality.

For modern-day engineering students, many schools have been attempting to fill the void of physical hands-on training by offering additional digital materials, industrial visits and technical talks by industry professionals, but this proved to be less-than-desirable for MITT’s Department of Mechanical Engineering. Looking to connect their academic offerings to real industrial opportunities as much as possible, being able to offer not only EON-XR solutions for their own lessons but also XR certification courses has been a major benefit for the institute.

“EON Reality’s extraordinary team has really performed well in engaging the session and in making my students realize their potential. The principal and administration of the institute are happy about the positive feedback from the students. On behalf of MIT Thandavapura, I take this opportunity to thank the team from EON Reality for collaborating with us.” Mr. Channabasavanna S. G., Assistant Professor Department of Mechanical Engineering of Maharaja Institute of Technology, Thandavapura.

EON Reality and MITT’s partnership will continue to evolve in 2021 and beyond, so keep an eye out for the latest updates.

About EON Reality

EON Reality is the world leader in Augmented and Virtual Reality-based knowledge and skills transfer for industry and education. EON Reality’s 21 years of success are tied to its belief that knowledge is a human right and should be available, accessible, and affordable for every human on the planet. To carry this out, EON Reality has developed the de-facto standard for Augmented Reality and Virtual Reality-based knowledge and skills transfer software that supports devices from mobile phones to large immersive domes. EON Reality’s global development network — with more than 20 locations worldwide — has created the world’s leading AR/VR library for education and industry with over 8,000 applications and over 40 million users worldwide. For more information, visit https://eonreality.com.

Siemens Releases Parasolid v33 for Geometric Modeling

By
Sachin R Nalawade
-
0

PLANO, TX, USA, Jan 5, 2021 – Siemens Digital Industries Software has updated Parasolid software, its open software technology for geometric modeling. The latest release expands on the exciting potential of Convergent Modeling for applications such as generative engineering, 3D printing and reverse engineering with new tools for integrating previously incompatible facet and B-rep data formats within a single modeling session. This enhanced support for mixed models can help drive significant productivity gains by eliminating the need for time-consuming model conversion and allowing users to apply classic design techniques directly to facet models.

 

Parasolid version v33.0
Parasolid now includes enhanced support for mixed models to help drive significant productivity gains.

 

Parasolid can also now add more value to design and engineering workflows in many different applications by allowing users to intersect meshes with all classic B-rep surface types and perform more sophisticated configurations of fillets and chamfers on mixed models. In addition, there are new tools for direct editing of faces and for rendering and repairing mixed models. Extensive classic B-rep enhancements have also been made in areas such as blending, sweeping, non-uniform scaling and rendering, bringing users gains in modeling flexibility and performance.

The Parasolid geometric modeling kernel is used in Siemens’ own Solid Edge software and NX software and is at the core of the Xcelerator portfolio’s open and flexible ecosystem. Parasolid is also used in over 350 other applications from industry leading CAD/CAM/CAE/AEC software vendors.

Learn more about the latest release of Parasolid here.

About Siemens Digital Industries Software

Siemens Digital Industries Software is driving transformation to enable a digital enterprise where engineering, manufacturing and electronics design meet tomorrow. The Xcelerator portfolio helps companies of all sizes create and leverage digital twins that provide organizations with new insights, opportunities and levels of automation to drive innovation. For more information on Siemens Digital Industries Software products and services, visit www.sw.siemens.com or follow us on LinkedIn, Twitter, Facebook and Instagram. Siemens Digital Industries Software – Where today meets tomorrow.

ActCAD 2021 Update 101484 Released

By
Sachin R Nalawade
-
0

REDMOND, WA, USA, Jan 4, 2021 – ActCAD 2021 version 101464 released for below products:

  1. ActCAD 2021 BIM
  2. ActCAD 2021 Professional
  3. ActCAD 2021 Standard

This is a general maintenance with few improvements and bug fixes. Below is a detailed log of changes:

  1. Fixed issues with annotative dimension text scaled on every edit
  2. Fixed the sysvars RECOMPUTEDIMBLOCKSREQUIRED & RECOMPUTEDRAWING
  3. Fixed Publish command for selected sheet details do not match in output
  4. Fixed the issue of layers filter applied wrong in the dropdown
  5. Fixed some issues with Licensing
  6. Fixed the slow loading issue of CUIX files
  7. Fixed the issues of splash images not chaning
  8. Fixed the issues of line types and profiles
  9. Fixed the crash issue of colorbooks dialog
  10. Fixed the command line focus issue of Dynamic screen input
  11. Fixed the German language keyboard issue of letter N
  12. Fixed some CUI file customization issues
  13. Fixed the crash issue of Color dialog when called from IRX
  14. Fixed text duplication when using \n at the beginning of a line
  15. Fixed hanging issue of ActCAD when Editor.WriteMessage method called from .Net applications
  16. Fixed the issue of Hatch using select entities in a particular drawing
  17. Fixed exception issue of Hatch boundary in a particular drawing with select entities option
  18. Fixed the hatch creation issue of Circles
  19. Fixed Mleader text height changing issue
  20. Fixed the issue of MLEADER does not display correct text height
  21. Fixed the issue of Rotated multiline text positioned wrong
  22. Fixed selection options from the drop-down list using the cursor and the Enter button
  23. Fixed Transient graphics not displayed if raster image is frozen
  24. Revised ODA libraries version to 6235
  25. Fixed Arc negative angle value works wrong
  26. Fixed 3X lines creation performance degradation

The new version is available for download from our downloads page.

About ActCAD

ActCAD brings Global Collaborated Technology Expertise to you at very affordable life-time price. ActCAD is powered by latest IntelliCAD 8.4, Open Design Alliance Tiegha Libraries and ACIS technologies. ActCAD has many enhancements, features and commands on top of IntelliCAD core. The add-on features, express menu commands allow ActCAD to become more productive for day-to-day projects. ActCAD works very closely with IntelliCAD on Development and Quality Assurance. Thanks to our highly automated test and build systems to keep our costs minimal. IntelliCAD was started in 1999 and has over 1 million trusted users now using IntelliCAD world-wide. ActCAD is a commercial member with active role in Release Committee and Board of Directors of IntelliCAD. For more information, visit http://actcad.com.

ZWSOFT Releases ZWMeshWorks 2021 for CAE

By
Sachin R Nalawade
-
0

GUANGZHOU, China, Jan 4, 2021 – ZWMeshWorks 2021, the CAE platform with ready-made pre- and post-processors, was officially released for solver developers, enabling them to integrate their multi-disciplinary solvers conveniently, and laying an important foundation for flexible customization of CAE software.

 

banner

 

Nowadays, a considerable number of developers focus on the development of excellent solvers. But due to the lack of pre- and post- processors, they cannot develop a complete CAE product in a short time. With powerful modeling capabilities thanks to the Overdrive kernel, advanced meshing technologies, and complete pre- and post-processing functions, ZWMeshWorks 2021 can integrate multi-disciplinary solvers, benefiting developers in different industries and significantly improving the development efficiency of professional CAE software.

Highly extendable and compatible CAE platform

Adopting the ideas of modular design and providing standard interfaces, ZWMeshWorks is highly customizable and extendable. With standardized geometric interfaces and solver interfaces, the 2021 version not only supports seamless data exchange of different file formats, but is also highly compatible with model data for multi-disciplinary simulation, to integrate solvers for the simulation of fluids, electromagnetics, structures, acoustics, optics, etc., and realize the commercialization of CAE in a shorter time.

 

ZWMeshWorks 2021_1
The platform for the development of multi-disciplinary CAE software

 

Meshing, modeling, pre- and post-processing: everything is ready for solver integration

ZWMeshWorks 2021 realizes efficient geometric processing and mesh generation by virtue of its powerful modeling capabilities and advanced meshing technologies. First of all, it supports parametric modeling, solid-surface hybrid modeling, model healing, etc., improving modeling efficiency and enabling quicker geometry cleanup and simplification. Moreover, with the Hybrid Advancing-Front & Delaunay Mesh Generation, it can accurately capture the characteristics of complex geometry, quickly and stably generate tens of millions of high-quality meshes. Multiple types of meshes like triangle, (hybrid) quadrilateral, tetrahedron and (hybrid) hexahedron can be generated automatically, and local mesh control, isotropic and anisotropic meshes supported.

 

ZWMeshWorks 2021_2

Powerful mesh generation of ZWMeshWorks

 

In addition to geometric processing and mesh generation, ZWMeshWorks provides other pre-processing functions, such as diversified function expressions, customizable and reusable material libraries, and convenient ways to apply boundary conditions. For post-processing, you can view, edit, probe, create and output the results as needed.

 

ZWMeshWorks 2021_3
Various ways to display results

 

An ecosystem for multi-disciplinary simulation

As an important tool for reducing costs and increasing efficiency in manufacturing, CAE software is essential to improve innovation capabilities and realize intelligent manufacturing. Therefore, ZWSOFT has established a CAE R&D center in 2018, recruited outstanding talents at home and abroad, and kept increasing R&D investment in the CAE field. Together with ZWSim-EM and ZWSim Structural, ZWMeshWorks 2021 forms ZWSim, the multi-disciplinary simulation solution, and shoulders the mission to accelerate the development of CAE products with its powerful meshing, modeling, and pre- and post-processing capabilities.

In the future, ZWSOFT will insist on enhancing the compatibility and ease of use of ZWMeshWorks, to help developers improve the development efficiency of professional CAE software, build an ecosystem for multi-disciplinary simulation, and provide reliable All-in-One CAx solutions to global users.

If you are interested, apply for a free trial.

About ZWSOFT

ZWSOFT CO., LTD. (Guangzhou) is a reliable and innovative engineering software provider with its flagship products ZWCAD and ZW3D. Committed to providing complete and seamless user experience to worldwide users with its all-in-one CAx solutions, ZWSOFT has continuously satisfied the diverse needs of various industries such as AEC and MFG. With over 20 years’ experience in the industry, its products and service have been proven by over 900,000 clients across 90 countries. For more information, visit https://www.zwsoft.com.

Stratasys to Present at 23rd Annual Needham Growth Conference on Jan 14

By
Sachin R Nalawade
-
0

EDEN PRAIRIE, MN, USA and REHOVOT, Israel, Jan 4, 2021 – Stratasys Ltd. (NASDAQ: SSYS), the world’s leading polymer additive manufacturing company, is pleased to announce that the company will be participating in the upcoming 23rd Annual Needham Growth Conference. Yoav Zeif, Chief Executive Officer and Lilach Payorski, Chief Financial Officer, will be presenting on Thursday, January 14, 2021, at 2:00 p.m. ET.

The presentation will be available as a live webcast and archived for 180 days at https://wsw.com/webcast/needham103/ssys/2306220.

It will also be available as an archive only at https://investors.stratasys.com/news-events/ir-calendar.

About Stratasys

Stratasys is a global leader in additive manufacturing or 3D printing technology and is the manufacturer of FDM, PolyJet Technology, and stereolithography 3D printers. The company’s technologies are used to create prototypes, manufacturing tools, and production parts for industries including aerospace, automotive, healthcare, consumer products and education. For more than 30 years, Stratasys products have helped manufacturers reduce product-development time, cost, and time-to-market, as well as reduce or eliminate tooling costs and improve product quality. The Stratasys 3D printing ecosystem of solutions and expertise includes 3D printers, materials, software, expert services, and on-demand parts production.

To learn more about Stratasys, visit www.stratasys.com, the Stratasys blog, Twitter, LinkedIn, or Facebook.

Shape-3D Opens Advanced Additive Manufacturing Center in Pune, India

By
Sachin R Nalawade
-
0

Jan 4, 2021: Pune, India :- Shape-3D announced the official opening of its new Advanced Additive Manufacturing Center in Pune, India

Pune facility is now home to a broad range of additive manufacturing technologies including LCD and SLA technology.Shape-3D intends to provide best-in-class affordable 3D printing technology and services to INDIAN SMEs and for this purpose has partnered with world-class AM OEMs like Formlabs and Zortrax, soon the company is planning to set up a PAN INDIA partner network for distribution of such progressive technologies.

While thanking their partners and customers during the launch promoters Mr. Mahesh Phadnis and Mr. Anubhab Hazra commented

“We are already successfully supporting 300 plus customers across various fields for their engineering software and reliability requirements, we feel this is the right time to cater their AM requirements through a world-class setup  Headquartered in Detroit of India Pune, “ said Mr. Mahesh Phadnis

“We are excited that our new Advanced Additive Manufacturing Centre here in Pune will enable us to offer our customers the fastest production available to meet their challenges, and support competitive advantage. Through this facility, we are strongly positioned to keep pace with technological innovations and support the growth of our customers,” said Mr. Anubhab Hazra

To provide an end to end concept to prototyping service Shape-3D has in-house software and hardware infrastructure like Zortrax LCD Inkspire printer, Formlabs 3B biomedical printer, FDM printers, ZWSuite,4D additive  Preform AM software, ZW3D CAD software & 3D scanners.

for details – visit – https://shape-3d.com/

BobCAD-CAM v33 Released

By
Sachin R Nalawade
-
0

CLEARWATER, FL, USA, Sep 21, 2020 – BobCAD-CAM, Inc. released its latest flagship standalone CAD CAM software, Version 33. Now available for download, V33 continues to raise the functionally bar providing tools and technology CNC manufacturers need most to improve productivity and efficiency while staying competitive in today’s ever-changing marketplace.

 

V33

 

Advancements in Tooling & Toolpaths

BobCAD-CAM V33 makes it easier to customize the tool library with imported 3rd party tool lists. MachiningCloud is the first partnership to take advantage of the new XML import option for directly import tools and tool assemblies from their online platform. V33 adds Barrel Mills to available tool types for 3, 4, and 5 axis toolpaths. V33 makes 3D surface machining faster with it’s new steep shallow operation which calculates finishing toolpaths in a fraction of traditional 3D finishing toolpaths.

CNC Measuring Cycles

BobCAD-CAM V33 adds Probing to its product family, supporting 41 cycles for tools setters and measuring cycles. Improve shop productivity by programming probe cycles from the CAM Tree. Geometry interaction with override makes it easy to customize probing cycles for tools, work offsets and part features.

Hole Machining Automation

BobCAD-CAM V33 adds automation tools that speed up programming for holes. Machining features are automatically created based on a customizable set of rules found in the knowledge base. Hole Feature Recognition makes finding and programming hole cycles faster and easier in V33.

Design Environment

BobCAD-CAM V33 adds new features that simplify workflow for 2D and 3D design. Better viewing with the addition of keyboard shortcuts and Views to Active UCS. Easier moving of geometry with Align to Coordinate System feature and Faster hole design with Advanced Holes.

For more information BobCAD-CAM V33 use this link: https://bit.ly/3ivMt07

About BobCAD-CAM

Since 1985, BobCAD-CAM provides manufacturers just like you with powerful and easy to use CNC programming CAD-CAM software. Our purpose is helping you effectively automate the machining process. We offer CNC programming solutions for Mill, Mill Turn, Lathe, Router, Plasma, Laser, Waterjet, and Wire EDM machines. For more information, visit http://www.bobcad.com.

NUM Launches Digital Twin Technology for CNC Machine Tools

By
Sachin R Nalawade
-
0

TEUFEN, Switzerland, Sep 21, 2020 –  CNC specialist NUM is pleased to launch the digital twin technology that enables machine tool manufacturers to reduce their time to market dramatically, by using powerful Industry 4.0 simulation techniques.

 

SimulationsumgebungNUM’s digital twin technology enables machine tool manufacturers to reduce their time to market dramatically.

 

Originally known as pairing technology, and first used by NASA in the early days of space exploration, digital twin technology is now rapidly gaining industry acceptance as one of the most cost-effective means of accelerating the development of products, processes and services.

For automation products such as machine tools, a digital twin is a virtual model that uses simulation, real-time data acquisition/analysis and machine learning techniques to allow full evaluation of a machine’s dynamic performance before constructing a physical prototype. The same technology can also be employed for customer presentations, virtual commissioning and operator training purposes – and all well before the actual machine itself has even been built.

NUM offers two versions of digital twin technology, to best suit customers’ needs.

Both versions are designed for use with NUM’s powerful, open-architecture Flexium+ CNC platform. One version uses a naked Flexium+ controller and resident virtualisation software running on the system’s industrial PC to simulate the twinned machine automation. The other version uses the actual Flexium+ controller that will eventually be incorporated in the machine, linked via EtherCAT to a standalone PC running specialist high speed hardware simulation software to represent the mechatronics of the twinned machine.

The virtual controller version includes a software development kit for creating the software model of the machine. The model is a standalone PLC program that uses predefined components to simulate individual machine elements, such as sensors, spindles, pneumatic cylinders, etc. It is loaded into the integrated PLC of the Flexium+ controller.

The Flexium NCK in the controller executes the NC programs and simulates the changing position values of the machine’s axes. To help users visualise the process, NUM’s package includes the CODESYS Depictor software tool produced by CODESYS GmbH, which is used to produce 3D visualisations from the IEC 61131-3 code created by the simulation.

The other version of NUM’s digital twin technology package accommodates real-time data acquisition and analysis. It is based on the ISG-Virtuos hardware simulation software produced by Industrielle Steuerungstechnik GmbH (ISG). The Flexium+ controller that is intended to be used in the physical machine is connected via an EtherCAT network to a standard PC, and interacts with the simulation software in real-time. The PC acts as the twinned virtual machine – with all simulated, virtual components behaving like real components in terms of their interfaces, parameters and operating modes – to accurately replicate the structure and dynamic performance of the real machine. The movements of the machine are displayed realistically on the PC, using the supplied 3D simulation software.

 

LoopTwinPowerful 3D simulation realistically illustrates the dynamic operation of the machine.

 

NUM’s new digital twin technology provides machine tool manufacturers with a very powerful and cost-effective means of reducing their developments costs and accelerating their time to market. The virtual controller version is especially useful for the early development stage of a project, before the CNC system has been finalised, while the real-time hardware simulation version has the advantage that all sequencing (PLC) and motion control (CNC) programs that are created during development can simply be transferred to the real machine as soon as it becomes available.

For more information, visit https://num.com.

TraceParts Celebrates 10th Anniversary of DesignSpark Engineering Community of RS Components

By
Sachin R Nalawade
-
0

SAINT-ROMAIN, France, Sep 21, 2020 – TraceParts is proud to celebrate 10 years providing support to the DesignSpark engineering platform.

 

DesignSpark-TraceParts

 

DesignSpark, the go-to design engineering platform created by RS Components, celebrated its 10th anniversary in July 2020.  RS Components is a UK-based high service-level distributor with over 1.5 million customers worldwide.  DesignSpark was created by RS Components to improve engagement with its large engineering customer base, and is a website that provides users with information, software tools and design aids.

Early in the development of the DesignSpark website, RS Components chose TraceParts to provide 3D models to its customers.  By offering 3D models in over 40 CAD formats, TraceParts enabled RS Components to appeal to the broadest audience.

 

TP-3D-model-library

 

In addition to traditional catalog services, TraceParts was able to expand its offer further to include a high-level, seamless integration with the RS Components e-commerce platform.  As a result, customers are able to view and download CAD-native 3D models from within the RS website, alongside other technical and commercial information.

RS Components represented a new challenge for TraceParts.  As the very first distributor of electronic components to create a catalog of 3D models, RS Components required additional functionality to represent its products correctly.  TraceParts was able to modify its standard catalog design to include this extra information, including original manufacturer name and part number alongside the RS Components stock code.  This program continues to be keenly supported by RS Components’ suppliers, who understand the benefits of providing 3D CAD models to engineers through their distribution channel.

 

DSE

 

The RS Components 3D catalog grew quickly, winning a loyal user base.  Rapidly exceeding 100,000 downloads, the catalog has grown in popularity and has provided over 3.3 million 3D downloads to date.

Following the success of the 3D CAD program, in 2013 RS Components introduced its free-to-use 3D CAD software called DesignSpark Mechanical.  Once again, TraceParts was a key partner in this project, helping to develop 3D models in DesignSpark Mechanical native format (.rsdoc), and making them available across all manufacturer catalogs of www.traceparts.com.

 

Customisable-shortcuts-measure-tool

 

Mike Bray, Vice President of DesignSpark at RS Components, says, “TraceParts has been a key partner from the very first days of DesignSpark. The team at TraceParts instantly understood what we were trying to give our customers and provided us with advice and innovative solutions to achieve our marketing goals.”

The DesignSpark platform now boasts more than 990,000 registered users and has contributed enormously to RS Components growth.  As the platform enters its second decade, TraceParts continues to be part of the DesignSpark story.  The RS Components catalog now includes over 135,000 3D models, available in more than 60 native CAD formats.  The latest incarnation of DesignSpark Mechanical, version 5, was released earlier in 2020 and has already been adopted by 11,000 users worldwide.

TraceParts congratulates RS Components for its innovative approach to technical marketing, and is proud to be part of this success.  For more information on RS Components visit their e-commerce website, or their DesignSpark engineering platform. The RS Components 3D catalog is available for free on the TraceParts CAD-content platform.

About TraceParts

TraceParts is one of the world’s leading providers of 3D digital content for engineering. As part of the Trace Group founded in 1990, the company provides powerful web-based solutions, such as CAD part libraries, electronic catalogs and product configurators.

TraceParts offers digital marketing services to help part vendors, 3D printing suppliers, software and computer hardware vendors promote their products and services and generate high-quality B2B sales leads.

The TraceParts portal is available free-of-charge to millions of CAD users worldwide. It provides access to hundreds of supplier catalogs and more than 100 million CAD models and product data-sheets that perfectly meet the specific needs of design, purchasing, manufacturing and maintenance processes and operations.

1...705706707...771Page 706 of 771