spot_img
HomeDesign NewsSimScale, Nominal Put Simulated-Design, Test into One Agentic Loop

SimScale, Nominal Put Simulated-Design, Test into One Agentic Loop

FRANKFURT, Germany, Nov 20, 2026 – SimScale, the AI-native cloud platform for engineering simulation, and Nominal, the Hardware Intelligence Platform for engineering teams, demonstrated an agentic design-and-test workflow at Formnext 2026. Nominal checks every simulated design against a program’s test requirements. When a design fails, Nominal Analyst identifies why and passes the requirement gap to the SimScale Engineering AI agent, which revises the geometry and runs the next simulation until the design passes. The physical test of the printed part is then judged against the same requirements.

Engineering AI is moving from assistants that answer questions to agents that act on engineering goals. Until now, those agents have stopped at the edge of simulation, because requirements, simulation and test live in separate tools owned by separate teams. For 3D printed parts, where every print and test campaign is slow and costly, that is expensive. Building on SimScale’s Engineering AI agents and Physics AI models, the joint workflow pairs an agent that understands test data with one that understands simulation, so designs reach the printer only after they pass.

The Formnext demonstration takes an additively manufactured heat exchanger through three design revisions against three requirements: pressure drop, transient response and thermal cycling. Wider passages fix the first design’s pressure drop but slow its response, a real engineering trade-off the agent resolves in a third revision that passes every check. Nominal then puts the printed part’s test results next to the SimScale prediction. Because a test also captures manufacturing tolerances and system effects a component simulation does not, engineers can trace any difference to its cause as soon as the test runs. Engineers approve each change, and every result links back to the decision behind it.

“Simulation is often used to diagnose and understand failures seen in the field. With Nominal, that becomes an agentic workflow. The requirement gap goes straight to our Engineering AI agent, and it comes back with a revised design and a new result. Nominal decides whether a design needs to change, SimScale decides how, and the engineer stays in charge of the call.” said, Jon Wilde, VP Product, SimScale.

“Hardware development teams have always verified their systems against requirements, and it requires multiple teams to collaborate to make progress. Virtual test, via simulation, brings down the cost of development. Use of agents, like Nominal’s Analyst agent and SimScale’s Engineering AI agent, ups the pace even further. Combining the two creates a powerful closed-loop process where engineers and engineering agents collaborate to create better designs, faster.” said, Sophie Scannell, Head of UK and Europe, Nominal.

Formnext visitors can see the workflow at the SimScale booth (VDMA pavilion, Hall 12.0, booth 12.0-G91E) and the Nominal booth (12.1-A68) from November 17 to 20. A recorded walkthrough is available at www.simscale.com/technology/integrations-partners/nominal.

About SimScale

SimScale is the AI-native cloud platform for engineering simulation. Trusted by more than 900,000 users, SimScale empowers engineers everywhere to innovate faster by exploring 1000’s of engineering decisions in seconds. By integrating Engineering AI agents and Physics AI models with computational fluid dynamics (CFD), finite element analysis (FEA), electromagnetic, and thermal simulation in a single cloud platform, SimScale empowers teams to engineer the irreplaceable. For more information, visit www.simscale.com.

About Nominal

Nominal is the hardware intelligence platform. Engineering teams across aerospace, defense, robotics, energy, and advanced manufacturing use Nominal to accelerate hardware development, equip engineers with AI-powered tools, and collaborate with confidence. The company has offices in Austin, Los Angeles, New York, Seattle, Washington, D.C., and London. Learn more at nominal.io. All Systems Nominal.

Nitin Patil
Nitin Patil
Editor and Director of Content, DailyCADCAM.com. Nitin completed his Master's in Mass Communication & Journalism and having 13 years of work experience as an editor, content writer with renowned international technical magazines and media companies. He is associated with CAD,CAM industry since 2008.
RELATED ARTICLES

Download eBook Now

Ebook nx

Most Popular